Vw license plate holder through bumper hole

#Vw license plate holder through bumper hole mod#
#Vw license plate holder through bumper hole plus#

I'm going to try and source some grommets and super glue and see if that will do it. So, anyway, the license plate holder is back on, sans one center rivet. Perhaps at the first service I'll have them remove the aero shield and empty the trash. I also noticed that, since the bottom of the car is completely sealed off, trash can accumulate in the grill area. One fell out from behind and it's either on the road now or somewhere in the car. Only I now only have three of the rivet centerpieces. So I resigned myself to keeping the license plate holder on the vehicle. Possible a grommet or something would make it possible for the bumper plugs to fit, but I don't exactly have those handy. They would just fall right out if I put them in there. It wasn't too bad, but the bumper plugs wouldn't cover the damage completely.ДЄnd then I found that the bumper plugs were too narrow for the holes in the bumper. So with the license plate holder off, I inspected the damage. Eventually I found that I could just pull really hard, and while the whole bumper cover would flex, the bottom rivets eventually came out.

#Vw license plate holder through bumper hole plus#

Damn damn damn! Plus the rivet couldn't be cut. Flips up and out of the way to use tow hooks if needed.

#Vw license plate holder through bumper hole mod#

Drilled one hole to line up with the Bronco bolts on the mod bumper. I thought maybe I could cut the rivet with some angle pliers since they're plastic.and I gouged the paint a little. Took a while to find one I felt comfortable with drilling another hole in and it still stay together. So I pushed them as far as I could and then pulled on the holder to try and get a look behind it. The bottom turns out there's some kind of foam or something about 1/8' behind the bottom holes, preventing you from being able to push the rivets all the way out. The top two were easy enough once I found something narrow enough to push through the hole. You have to push the middle of the rivet out from the front, and then the holder is supposed to come off. I ordered a set, and got them this weekend.ДЇirst of all, getting the license plate holder off is a PITA. The bottom turns out theres some kind of foam or something about 1/8.

You have to push the middle of the rivet out from the front, and then the holder is supposed to come off. License plates are a necessary evil on the front of our cars, but the GrimmSpeed License Plate Relocation Kit can save your bumper from dealer-drilled holes and has the added benefit of removing the license plate from the direct path of airflow through your front mount intercooler and radiator. I was hoping that the plugs from would fit. First of all, getting the license plate holder off is a PITA. Pre-installed, which means the bumper cover has already been drilled. Guess what my VW ID.4 came with? A front license plate holder. I live in one of the 19 states that doesn't require a front license plate.